top of page
Hunter Wyatt Studio


3D Printing Skulls: Why Printed Skulls Are Great for Art — and How I Print My Own
Affiliate disclosure: Some links in this post may be affiliate links. If you buy through them, I earn a small commission at no extra cost to you — it helps keep the studio running and the tutorials free. I only link to supplies I actually use in my own shop. One thing up front: nobody sponsored this. I bought the printer and everything in this post myself. By Hunter Richardson, Hunter Wyatt Studio, Strasburg, Virginia — skull cleaning and carving for 10+ years. Quick answer:

Hunter Richardson
Nov 108 min read


The Carving Burrs I Use for Skull Carving: The Must-Haves and What Each One Does
If you want to start carving skulls, you do not need a drawer full of burrs. Most of my carvings are done with just a few: a Dremel 106 ball burr for outlining, an inverted cone burr (like the Dremel 108) for clean lines and edges, and carbide cross-cut burrs for carving down layers around a design. Everything else on this list — cup burrs, diamond discs, ball burrs for stippling, cylinder and flame burrs, diamond burrs, and used dentist burrs — fills a specific job. Here is

Hunter Richardson
Oct 3010 min read
bottom of page