top of page
Search

3D Printing Skulls: Why Printed Skulls Are Great for Art — and How I Print My Own

Nov 10
8 min read

Updated: 3 days ago

Affiliate disclosure: Some links in this post may be affiliate links. If you buy through them, I earn a small commission at no extra cost to you — it helps keep the studio running and the tutorials free. I only link to supplies I actually use in my own shop. One thing up front: nobody sponsored this. I bought the printer and everything in this post myself.

By Hunter Richardson, Hunter Wyatt Studio, Strasburg, Virginia — skull cleaning and carving for 10+ years.

Quick answer: 3D printed skulls give you skulls you can't get any other way — rare, extinct, or illegal-to-possess species, printed anatomically correct from real scans — for a fraction of a real skull's price, and you can shape them before printing (thicker walls for carving, miniatures for jewelry). Back in 2020 I made a whole video about why printed skulls are great for art — but I was buying them. Now I print my own on a resin printer, an Anycubic Photon Mono M7 Pro, and my first print ever was a full-size coyote skull: 1 hour 15 minutes, about $4 worth of resin, in white resin that already looks like bone. This post is the why, and the how.

🖨️ The printer I use: Anycubic Photon Mono M7 Pro — code HUNTER15 takes $15 off orders of $200+.

The printed coyote skull in hand — white resin, no paint, straight off my own printer

Why 3D Printed Skulls Are Great for Art

I said this in 2020 and six years of working with them has only made me more sure of it. Three reasons:

  1. Availability — skulls you simply can't get

Printed skulls make animal skulls that are hard to get hold of available to people like you and me. Think of a lion — a real lion skull is very expensive and hard to come by. Think of animals that have gone extinct: people scan fossils, reconstruct those skulls, and print them — you can hold a skull from an animal that no longer exists and use it for your art. Think of skulls that would be illegal to possess otherwise — an eagle skull, for instance. Most people can't own one. A 3D printed version? Perfectly fine. You can even make a jackalope.

  1. Price — a fraction of the real thing

Skulls that would normally be very expensive can be printed for a fraction of the cost. My example from the 2020 video: a hyena skull. Real, it would cost roughly $1,000. The 3D printed one — anatomically correct, scanned from a real skull — cost me $165.

That's not even a quarter of the price. And as you'll see below, printing your own takes

the cost down to a few dollars of resin.

  1. You can change the skull before it exists

This is the one real skulls can never match. You can manipulate the file before printing to suit your needs:

  • Thicker walls for carving. I had the walls on that hyena skull made a little thicker than a real skull's — so when I carve designs into it, I have more material to work with.

  • Any size. Shrink a skull down to a miniature for jewelry or sculpting work.

  • Copies of your own art. I've carved a skull, had it 3D scanned, and printed miniatures of it — like a painter making signed copies of his work. Life-size copies work too.

A miniature printed deer skull with antlers, fresh off the M7 Pro — the same file could print at any size, from jewelry to full-size







Back Then I Bought Them. Now I Print My Own.

When I made that video in 2020, I didn't own a printer — I bought printed skulls from people who did. That changed this year when I bought the Anycubic Photon Mono M7 Pro. I had never 3D printed anything in my life. My first real print, the same day I set the machine up, was the coyote skull in the photo at the top. The jaw even articulates.

If you want real skulls instead, that's my guide to where to find them. Printed skulls

aren't a replacement for the real thing — they're the other half of the toolbox.

The Setup I Print With

  • Printer: Anycubic Photon Mono M7 Pro — a resin printer. Instead of melting plastic filament, it hardens liquid resin layer by layer with light. That's how it gets detail fine enough for teeth and paper-thin bone.

  • Resin: Anycubic High Speed Resin 2.0, in white. White matters: straight off the printer, unpainted, it already looks like bone. One heads-up from my unboxing — the printer does not come with resin. Order it separately or you own a very nice paperweight until it shows up.

  • Wash & Cure 3 Plus: the station that washes the print in alcohol and then cures it hard with UV light.

  • The two pumps (this confuses everybody, so plainly): one pump tops the resin tank up from the bottle during a long print. A second, separate pump circulates the resin in the tank through a heater and holds it around 77°F. Cold resin gets thick and prints worse — and my setup lives in an unheated shed, so that heater is the difference between printing all winter and waiting for spring.

Before the skull, I ran one of the test prints that comes on the printer's USB stick — sliced for the exact resin in my tank, because the resin setting decides how long the

The test print on the build plate — the print hangs from the plate while it grows, layer by layer

light hits each layer. Wrong resin, wrong timing, failed print.

Printing a Coyote Skull, Step by Step

Step 1: Get a file worth printing

The skull I printed is "Coyote Cranium and Mandible" by Terrie on Printables (linked at the end). It's not a sculptor's guess — it was segmented from a real coyote CT scan, which is why the anatomy is right. The file is free under a CC BY-NC license: print it for yourself, not for sale. Check the license on any file you download; they vary.

Step 2: Prep it in the slicer

The slicer is the program that cuts the model into thin layers and writes the instructions the printer follows. My prep for the skull:

  • Tilt the skull about 35–40° — a tilted print peels off the tank film cleaner.

  • Hollow it, 2.5 mm wall — a solid skull would waste resin and cure badly. (Remember reason #3: wall thickness is yours to choose.)

  • Two 5 mm drain holes underneath, so trapped resin can wash out.

  • Medium auto-supports — the little scaffolding that holds overhangs like the jaw and cheek bones while they print.

And the lesson my first print taught me: auto-supports don't care which side people look at. They left little bumps on the face of my skull. They sand down — but next time, the supports


The coyote skull in the slicer, supports placed — the program cuts the model into 1,578 layers for the printer
Pulling the supports off the printed jaw — they peel away by hand, and next time they go on the bottom where they don't show

go on the bottom, where nobody's looking.

Step 3: Print

The skull is 1,578 layers tall at 0.100 mm per layer. It drank about 140 ml of resin and took 1 hour, 15 minutes — the slicer's estimate was 1 hour 9, so it was only about five minutes optimistic. Cost: roughly $4 of resin for a full-size coyote skull, about 7½ inches long — which nearly fills this printer (its build space is about 8.8 × 5.0 × 9.1 inches). The jaw printed right after, same process, about an hour of its own. Ten full coyote skulls in a day is realistic math on this machine.

My exact settings are at the end of this post if you want to copy them.

Step 4: Wash and cure

Fresh off the printer, a print is coated in uncured resin. Gloves on — you don't handle it bare-handed.

  1. Wash: 5 minutes in 91–95% isopropyl alcohol (in the wash station), which strips the uncured resin off.

  2. Dry completely.

  3. Cure: 3-minute rounds under UV, flip, and a second round, so every side gets the light and the resin hardens fully.

That's it — the skull at the top of this post is exactly that: washed, cured, nothing else. No paint.

The fresh print at the wash & cure station — wash in alcohol, dry, then cure under UV until the resin is fully hard

Safety, Plainly

  • Nitrile gloves any time you're handling uncured resin or fresh prints.

  • A respirator — same rule as bone dust in my shop; don't breathe what you don't have to.

  • 95%+ isopropyl alcohol for washing, handled like the flammable liquid it is.

  • Uncured resin isn't done being chemicals just because the print looks finished — the wash-and-cure step is what makes a print safe to handle and display.

Printed vs. Real — What Each Is For

A printed skull will never be the real thing, and I still clean and carve real skulls most of the time — that's the whole rest of this site (start with how to clean a deer skull). But printed skulls win where real ones can't: species you can't legally or affordably own, practice pieces you can carve without risking a one-of-a-kind skull, miniatures, replicas for displays and mounts, and copies of your own finished art. Use each where it's

strong.

My exact settings — Anycubic Photon Mono M7 Pro, High Speed Resin 2.0 (white): layer 0.100 mm · normal exposure 1.400 s · off time 0.500 s · bottom exposure 15.000 s · bottom layers 5 · Z lift 4.000 mm at 15.000 mm/s · retract 15.000 mm/s. Skull prep: tilt about 35–40°, hollow 2.5 mm wall, two 5 mm drain holes underneath, Medium auto-supports. Wash 5 minutes in 91–95% isopropyl alcohol, dry completely, cure in 3-minute

rounds (the skull got two).

3D Printing Skulls — FAQ

How much does it cost to print a skull?

The full-size coyote skull in this post used about $4 worth of resin and 140 ml of it. The file was free. The printer itself is the real investment — and back in 2020, before I owned one, I paid $165 for a single printed hyena skull, so the machine pays for itself in skulls pretty quickly if you print a lot of them.

How long does it take to print a skull?

The coyote skull took 1 hour 15 minutes; its jaw about another hour. That's with a high-speed resin — the same skull at finer layer settings or in a standard resin would take longer.

Can you carve a 3D printed skull?

Yes — it's one of the main reasons I use them. When you prep the file, make the walls a little thicker than a real skull's and you have more material to carve into. I did that with the hyena skull in my 2020 video, and I've carved printed pieces since.

What size skull can the M7 Pro print?

Its build space is about 8.8 × 5.0 × 9.1 inches. The 7½-inch coyote skull nearly filled it. Coyote-size and smaller is comfortable; a big deer skull would need a bigger printer or the model split into pieces.

Where do you get skull files?

Printables is where I got the coyote (a CT-scan model by Terrie — linked below). Look for files made from real scans if you want anatomy that's actually right, and check each file's license — many, like this one (CC BY-NC), are free for your own printing but not for selling prints.

Do printed skulls look real?

In white resin, yes — unpainted, the coyote at the top of this post reads as bone. The detail comes from the scan: teeth, sutures, and the thin bones inside the nose are all there. Up close in your hand it's smoother than real bone, which is part of why it's such a good carving and painting surface.

Is a resin printer hard to learn?

I set mine up in the morning and had a finished skull the same day, having never printed anything — the full video below shows the whole thing, mistakes included. The learning curve is real but it's days, not months.

Want to Go Further?

Art! — why printed skulls belong in an artist's toolbox.

Thanks for learning with me. Now go print some skulls!

— Hunter Richardson, Hunter Wyatt Studio, Strasburg, Virginia

 
 
 

Comments


  • Instagram
  • Youtube
bottom of page