top of page
Search

How to Inlay Snakeskin into a Skull (and Other Mediums)

3 days ago
3 min read

Updated: 3 hours ago

The following is the process I use to do snakeskin inlay on skulls. You can also use this method on other mediums (knife handles, etc.) and even with other materials (using fabric, etc. instead of snakeskin for the inlay). Using this method gives you an inlay that is flush with the surrounding area and forms to the contours of the skull correctly.


  1. Carve outline of inlay area

Trace out the area you want to inlay and carve a groove on the inside of this line. I use a Dremel 4000 and cut this groove with a ball burr (carbide or diamond dust works fine). After this groove is cut, go back over the inside edge of your groove with a large cross cut football shaped burr and carve it down so that the inside of the inlay area slopes down to the outside edge of the groove you cut. The idea is that you don't have to carve down the entire inside of the inlay area just around the edges. Once the snakeskin is put in it will give the illusion that the entire area is sunken but in reality it's just the edges. Don't worry about getting the inside area smooth because we will be covering it up with the snake skin. If you are new to carving on skulls and want more information, my book Skull Carving covers everything you need to know: https://www.amazon.com/dp/B08CG7DN2T?tag=possumsmuggle-20

The inlay area traced in pencil on the side of a deer skull
Cutting the groove inside the traced line with a small ball burr
The groove carved around the inside of the traced outline
Sloping the inside edge of the inlay area down with a cross cut football burr
The side of the deer skull before carving the inlay area

  1. Using paper make template of inlay area

In order to get the right size and shape for the snakeskin you can do the following trick. Take a piece of paper and while holding it in place press down firmly around the entire edge of your space you carved out. This will make a crease/indent in the paper the exact shape and size of your area. You can then cut this shape out and use it as a template to cut out the correct shape of snakeskin. Make sure when you trace out the template on the back of the snakeskin that the scales are pointed in the direction that you want them to be on the skull.

Pressing paper firmly over the carved area to crease a template
The paper template with the creased outline of the inlay area
Tracing the paper template onto the back of the snakeskin with a Sharpie
The cut snakeskin piece held up to the carved area to check the fit

  1. Soak snakeskin in water

Now that you have your snakeskin cut out there is one more trick that will make this all work better. Soak the snakeskin in water to make it pliable and drape over the carved out area. Use something like a bag of rice or sand to press down on the skin and form it to the skull and leave it to dry. This will make the skin fit naturally to the contour of the skull when dry.

The cut snakeskin piece soaking in water to make it pliable
A bag of sand weighting the soaked skin so it forms to the skull as it dries

  1. Inlay snakeskin using gel medium

After the skin is dry you can then take this time to trim up any edges that might not fit correctly. The very last step is to bond the skin into the inlay. I use gel medium (it's actually a gel used to thicken paint but also works great as a bonding agent). Paint a layer of the gel onto the backside on the snakeskin and press into the inlay area. The gel will dry relatively fast so you can press down any edges that might stick up till it dries in place. Then lastly paint on a thin layer of the gel over the entire skin (outside) and edges to further finish and bind the skin in place.

The back of the cut snakeskin piece, formed and dry
Liquitex Matte Gel medium, used to bond the snakeskin into the inlay
Brushing gel medium onto the back of the snakeskin
Pressing the snakeskin into the inlay area while the gel sets
Brushing a thin layer of gel medium over the finished inlay

You are left with a very professional clean looking inlay that fits the contour of the skull perfectly, and fits into the inlay correctly using the tips above. When you are looking for snakeskin to use make sure you buy skin that is already tanned and not just stretched

out raw and dried. I have found eBay to be a pretty good resource.

The finished snakeskin inlay, flush with the side of the deer skull
The finished snakeskin inlay from another angle
The finished deer skull with snakeskin inlay, held in hand


Feel free to ask me any questions under the video!


~ Hunter Richardson

 
 
 

Comments


  • Instagram
  • Youtube
bottom of page